Starter Motor Check; Starter Motor Assembly; Starter Relay Check - MV Agusta F3 675 Workshop Manual

If a fault has been diagnosed in the starter motor, it is

STARTER MOTOR CHECK

necessary to proceed as follows with the check:
• Connect a tester between earth and the starter
motor terminal.
• Check that there is continuity between the positive
pole and the engine earth. If there is no continuity,
substitute the starter motor.
Assemble the starter motor in the reverse order of

STARTER MOTOR ASSEMBLY

removal. Pay attention to the following points:
Substitute the O-ring with a new one to avoid
oil leakage and the ingress of humidity.
• Apply grease to the oil seal lip.
• Apply a small quantity of MOLYKOTE to the rotor
shaft.
• Apply a small quantity of LOCTITE 243 to the bolts
of the starter motor.

STARTER RELAY CHECK

• Disconnect the start-up relay connector.
Electrical system
- 19 -
E