Table of Contents
Advertisement
Suspension and wheels
Evaluate the state of wear of the ring gear. If it appears
to be too worn, proceed as described in the following
operation.
Extract the 5 spring drives (2) from the gear flange sup-
Flexible coupling check
port (3) and assess its condition.
If the spring drives are worn, replace with new ones.
3
2
Remove the 5 nuts (3) to free the crown (1) from the
crown flange (2).
F
1
Replace the crown.
2
Remount the new crown on the crown flange, making
sure the pins (4) enter the holes.
Screw the nuts back on to the required torque pressu-
re.
4
Ring gear nuts torque pressure: 25 N•m
3
Check that the coupling bushes of the gear flange sup-
port (1) and the driving flange (2) do not show any
signs of excessive or uneven wear.
1
- 70 -
Hide quick links:
Advertisement
Table of Contents
