Substitution And Bleeding Of The Rear Brake Fluid - MV Agusta F3 675 Workshop Manual

SUBSTITUTION AND BLEEDING OF THE REAR
BRAKE FLUID
The operation described herewith must be
carried out with the engine cold because of
the nearness of the exhaust tubes that could
cause grave burns.
To carry out this operation it is necessary to remove the
tank (1) along with the supporting bracket (2) from the
frame plate, and then detach it from the bracket.
Open the cover of the rear brake fluid reservoir by
removing the two screws (3).
Position the tank using a clamp and a protective cloth,
and fasten it to the plate of the frame.
Be careful to not spill the fluid from the
reservoir during these operations.
Brake fluid is extremely corrosive.
Avoid contract with the eyes, skin and nose.
Wash abundantly with water if contact is
accidentally made and consult a doctor.
During the successive operations, avoid
spilling the fluid onto painted surfaces.
Fill the braking system by operating the rear brake
lever.
Brakes
1
- 25 -
2
3
H