Extract the oil seal.
Check that the sleeve does not have marks on the
Fork assembly check
external part that could have repercussions inside the
assembly. Ensure that the inside is completely smooth,
without any scratches.
If necessary, substitute with a new part.
Check for marks or scratches on all surfaces of the
stem and check the condition of the chroming.
Measure the length of the spring and compare
with the following values:
- F3 675:
To replace the bushings inside the sleeve, operate
using the required tool in accordance with the method
described in the diagram.
Special tool No. 8000B6871 (disassembly)
Special tool No. 8000B6785 (reassembly)
After having carefully checked all components, substi-
Assembly oil seal and anti-dust seal
tute those damaged and/or deteriorated.
Grease the lips of the new anti-dust seal (1) and the
new oil seal (2) with the appropriate grease.
Recommended grease: MOLYKOTE 55M
Make sure that the bushings and washer placed again-
st the oil seal are inside the sleeve. Proceed with re-
assembly of the oil seal using the required tools.
Special tool No. 8000B6785
Install the dust seal and oil seal on the stem.
Suspension and wheels
240 mm
- 19 -
2
1
F