Table of Contents
Advertisement
Brakes
Disengage the switch cabling by removing the two
marked rubber clamps.
Unscrew connection (1) as shown in the figure so as to
disengage the pump from the brake line.
1
H
Loosen the retaining clamp by sliding it out of the work
area and pull out the brake fluid pipe.
Unscrew the two fixing screws (2) of the brake pump to
its relative support.
Take off the bottom fairing clamping plate (3).
Remove the pump.
3
2
- 29 -
Hide quick links:
Advertisement
Table of Contents
