Slide the pad supporting pin (1) off with a screwdriver
until it comes out from the opposite side, freeing up the
circlip as well (2).
Remove the pad (3) by letting it drop down.
Remove the caliper from the support by removing the
2 fixing screws.
Remove the brake pads.
H
Carry out the check every 6000 kilometres.
Check the condition of the rear braking system and its
components.
Proceed with re-assembly following the operations for
disassembly in reverse order.
Brakes
2
- 24 -
1
1
Brake disc
Brake pads
2