Multifunction display
It displays the currently engaged gear. "N" stands
10 Gear display
for "neutral".
B
Indicates the number of the control unit mapping cur-
11 Control unit mapping display
rently selected.
It displays the speed of the motorbike. It can be given
12 Speedometer
in kilometres per hour (Km/h) or in miles per hour
(Mph). The full scale measures 300Km/h (186 Mph).
It displays the temperature of the coolant by turning
13 Thermometer
on a variable number of segments on a graduated
scale. When the temperature falls outside the nor-
mal operating range, it may display one of the fol-
lowing information:
- the display shows just one blinking segment; it
means that the temperature is low;
- all segments are on, while the upper segment is
blinking; it means that the temperature is high.
Danger - Notice: if the temperature is high,
stop the motorbike and check the coolant level.
In the event that it was necessary, top up. If the
warning light turns on even if the level is ade-
quate, stop driving.
Indicates the traction control level currently select-
14 Traction control level display
ed.
It displays the total distance covered; from 0 to
15 "TOTAL" odometer:
999999 (Km or miles)
It displays the length of a trip; from 0 to 999.9 (Km
Trip counter 1, "TRIP 1"
or miles)
It displays the length of a trip; from 0 to 999.9 (Km
Trip counter 2, "TRIP 2"
or miles)
It displays the time measured by the chronometer.
Chronometer
Indicates the current time.
16 Clock
Maintenance
10
- 58 -
12
11
14
16
15
13