MV Agusta F3 675 Workshop Manual page 225

Turn the stem upside down and completely pour out
the oil into a suitable container.
Recover the oil in an appropriate container.
Do not dispose of the used oil in the environ-
ment.
During this phase also take the spring pre-load spacer
out (1).
Separate sleeve and stem by pulling along the axis.
Remove the central lower screw that fixes the damping
piston. Keep the sealing washer underneath.
When refitting, tighten at 35 N•m.
Suspension and wheels
- 17 -
1
35 N•m
F