Frame
EXHAUST VALVE TRANSMISSIONS ASSEMBLY
AND ADJUSTMENT
Take
out
the
exhaust
valve
actuator
(Code
2
8000B2126) and make sure that the top opening (1) on
1
the pulley is aligned with the symbol (2).
Position the terminals on the exhaust valve actuator as
shown in the figure. Push the sheaths of the transmis-
Closing
sions (3) until they touch the actuator.
G
Opening
3
Be careful to make the cables correspond with the rela-
tive opening (4) and closing (5) functions (the opening
transmission has an additional collar on the terminal
from the exhaust valve line).
4
5
- 42 -