Table of Contents
Advertisement
Check once again the level of the coolant inside the
expansion tank.
This must reach a position above the "MIN" line
marked on the expansion tank.
If the level is inferior to the «MIN» mark, top up the
coolant level by pouring new coolant into the filler hole.
B
Complete the assembly of the motorcycle.
Check →
on pre-delivery and at the first 1000
ELECTRIC COOLING FAN
kilometres and then every 6000 kilome-
tres.
To carry out the check on the functioning of the electric
cooling fan, switch on the engine and heat it up.
The electric fan must start up when the temperature of
the coolant liquid reaches the fourth notch on the dash-
board. If the electric cooling fan do not switch on, carry
out the checks on the various components as
described in chapter L "Cooling system".
Maintenance
- 14 -
MIN level
Hide quick links:
Advertisement
Table of Contents
