Fork Oil Substituion (F3 Oro) - MV Agusta F3 675 Workshop Manual

Install the upper bushing into the outer fork sleeve by
using the previously assembled tool and tapping it gen-
tly with a plastic hammer, until it reaches a solid stop.
Apply the prescribed grease on the outer surface of the
lower bushing.
Recommended grease: Ohlins Red Grease
(cod. 00146-01)
Install the lower bushing into the outer fork sleeve by
using the previously assembled tool and tapping it gen-
tly with a plastic hammer, until it reaches a solid stop.
Apply a thin layer of the prescribed grease on the outer
surface of the washer and of the oil seal. Install them
into the outer fork sleeve.
Recommended grease: Ohlins Red Grease
(cod. 00146-01)
Install the circlip behind the oil seal.
Apply the prescribed grease to the scraper seat and
carefully press fit the scraper on the outer fork sleeve.
Recommended grease: Ohlins Red Grease
(cod. 00146-01)

Fork oil substituion (F3 ORO)

Turn the stem upside down and completely pour out
the oil into a suitable container.
Recover the oil in an appropriate container.
Do not dispose of the used oil in the environ-
ment.
Place the fork leg in a vice, taking care to protect its
surface against possible damage.
Apply some front fork oil on the inner surface of the fork
sleeve. Insert the fork sleeve on the fork stem and
carefully slide it all the way down.
Suspension and wheels
- 27 -
F