Front Brake Calipers Substitution - MV Agusta F3 675 Workshop Manual

FRONT BRAKE CALIPERS SUBSTITUTION

• Slightly move the front brake lever towards the right
handgrip and hold it in position with a strap to limit
the outflow of brake fluid during subsequent opera-
tions.
• Unscrew the fitting with a 12mm key, being careful to
avoid spilling any brake fluid.
Brake liquid can corrode painted surfaces. Clean
immediately any spilt brake liquid.
• Remove the 3 sealing washers, and change them in
the assembly phase with new ones.
• Remove the two caliper fixing screws indicated in
the figure.
• Remove the brake caliper.
NOTE
The removal operation is identical for both
calipers.
Brakes
- 13 -
H