Oil Radiator Assembly - MV Agusta Brutale 675 Workshop Manual

Cooling system
Slip the three silent blocks from the three upper support
brackets.

OIL RADIATOR ASSEMBLY

Before reassembly, check the integrity of the oil tubes
and replace if necessary.
Change the sealing rings for the oil pipe fittings every
time they are disassembled.
Grease O-rings with silicone grease.
L
Proceed to re-assemble the previously removed parts
following the disassembly instructions described
below, being careful not to put the pipes in backwards,
confusing right with left and one end with the other.
- 30 -