Table of Contents
Advertisement
It is possible to adjust the position of the front brake
BRAKE / GEARCHANGE COMMANDS CHECK
lever and the rear brake and gear levers. Such adjust-
ments have been created to optimise the grip and the
movement of the commands with regards to the needs
of the motorcyclist. The commands of the motorcycle
are initially calibrated to a standard position, but can be
altered as follows.
Front brake lever adjustment
Never carry out adjustments whilst riding
the motorcycle.
Pull the lever to neutralise the push of the spring and
at the same time, adjust the position by rotating the
ring in a clockwise or anti-clockwise direction.
In a clockwise direction: The lever goes further away
from the handgrip.
In an anti-clockwise direction: The lever comes closer
to the handgrip.
Whenever the command levers do not func-
tion correctly or have excessive play, con-
sult chapter H "Brakes" for the overhaul of
the same.
In normal conditions, when the engine is cold, the play
Adjusting the clutch play
of the clutch transmission must be ~3 mm at the point
shown in the photo.
Maintenance
- 41 -
B
Hide quick links:
Advertisement
Table of Contents
