Table of Contents
Advertisement
Warning/malfunction alerts
The dashboard may highlight the presence of a fault or
a malfunction during different using conditions of the
motorcycle.
- Engine start: As you turn the ignition switch to the ON
position, the instruments and the warning lights will go
through the self-diagnostic cycle. If the self-diagnostic
cycle detects a fault in the vehicle, the display shows
the warning alert shown in the picture. In particular,
this message highlights the vehicle part or device on
which the fault has been detected.
- Press "OK" button to access to "RUN" mode. The
direction indicator emergency lights begin to flash.
WARNING
If a fault is detected on the vehicle when the
engine is off, do not start engine.
- Fault during vehicle riding: If a fault is detected during
riding, the lower portion of the display shows the
warning alert shown in the picture. The direction indi-
cator emergency lights begin to flash.
WARNING
If a fault is detected during riding, stop the
vehicle.
Maintenance
- 81 -
B
Hide quick links:
Advertisement
Table of Contents
