Changing the engine oil
For replacing the oil, refer to the data in the table.
B
Lubricating system
component
scrankcase and oil sump
radiator and hoses
residual
Unscrew the oil filler cap (1),
place a container under the engine to catch the used
oil and unscrew the oil drain cap (2).
The quantity of oil which drains off from the
NOTE
sump should be about 2.5 L.
To complete the procedure properly it is
also recommended to replace the oil
contained in the oil radiator.
If the engine is installed on the vehicle, it may be
necessary to remove the oil radiator.
Removing the oil radiator
Detach the bracket (3) from the plate (4) and the
(coolant) radiator (5)
Q.ty
Litre
2.5
0.5
0.2
4
3
Maintenance
1
- 12 -
2
5