Checking The Contents; Installation Outline Drawing; Check Item When Turning Off The Main Power - Canon imageRUNNER ADVANCE C2030 Series Manual

Checking the Contents

Although pictures and illustrations of imageRUNNER ADVANCE C2030/C2020 Series are
used in this procedure, the procedure is the same in the case of models other than the series.

Installation Outline Drawing

Check Item when Turning OFF the Main Power

Chek that the main power switch is OFF
1) Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and the Main Power lamp are both turned OFF, and
then disconnect the power plug.
Unpacking
1) Turn OFF the main power switch of the host machine.
2) Open the plastics, and remove the 2 pads by lifting the rear of the equipment. Then, tuck
the plastics toward the front.
F-1-4
F-1-5
Pad
Plastic
Pad
F-1-6
3
3