Loading Paper into the Paper Deck
If you select the paper deck when it has no paper loaded in it, or if the paper deck runs out of
paper during a Copy job, a screen prompting you to load paper is displayed on the touch panel
display.
Follow the procedure below to load paper into the paper deck:
CAUTION
•
When loading paper into the copier, take care not to cut your hands on the edges of the paper.
IMPORTANT
•
The paper deck can only accommodate paper from 64 to 105 g/m
load paper that is heavier.
NOTE
•
If the message is displayed during a Copy job, you have to press
resume copying.
•
If you select another paper feeding location that is loaded with paper, press [Done] and then press
(Start) to resume copying.
•
To load paper of 64 to 79 g/m
location for thin paper. (See p. 2-18.)
•
The screen that appears differs depending on the options attached.
2
in weight, you have to first designate the paper deck as the feeding
2
in weight. Use the stack bypass to
(Start) after loading paper to
Paper Deck-E1
5
5-29