Remove Finger Prints; Clean The Screen; Items Required; Prerequisites - Christie Entero RPMSP–LED01 Installation Manual

Remove Finger Prints

1. Use a lint free cotton cloth with acetone and alcohol to dab the stain. For a finger print that is hard to
remove, use a cotton swab dipped in acetone.
2. Use compressed air to dry the solvent.
6.3

Clean the Screen

Notice: Typically, it is not necessary to clean the screen; however, if required follow the guidelines listed here.

6.3.1 Items Required

• Mild soap or detergent diluted with luke warm water
• Lint-free cloths (without color)
• Chamois
• Cotton exam gloves and/or vinyl or latex exam gloves

6.3.2 Prerequisites

• Make sure the work area is free of fumes, fluids and dust.
• Never drop or slide screens on their edges or surfaces.
• Before laying screens onto flat work surfaces, lay foam slip sheets down to protect screen.
• Avoid laying screens on uneven or dirty work surfaces. Small chips or dirt particles can damage the screen
surface.
• Use cotton, vinyl or latex gloves when touching or handling the screen.

6.3.3 Instructions

1. Apply soap or detergent solution to lint–free cloth.
2. Wipe the screen surface to remove dirt or oils. Apply light pressure only.
3. Use another lint-free cloth and clean water to wipe the soap from the screen surface. Apply light pressure
only.
4. Use a dry lint–free cloth to blot the surface dry.
6-2 Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2 (04-2013)