Connect The Phm To The Em And Ac - Christie Entero RPMSP–LED01 Installation Manual

3.6.2 Connect the PHM to the EM and AC

1. Install the projector cables. To determine the location of
each cable, see the Interconnection Diagram affixed to the
LM.
2. Move the cables connecting the projector to the EM away
from the projector vents and the light path, and secure
with cable ties.
3. Attach a cable anchor to the cube frame with an M6 cap
screw and a flat washer. Secure the projector power cable
to the anchor with a cable tie.
3-8
Interconnection Diagram
Electronics Module
EM Power
Link A
EM Network
Projection Head Module
EM Network
Light Module
EM Power
Shown in lens-vertical configuration (top view)
Same connections for lens-horizontal configuration
Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2 (04-2013)
Link A