Focus .64:1 Fixed Lens - Christie Entero RPMSP–LED01 Installation Manual

4.3

Focus .64:1 Fixed Lens

The focus and geometry for Entero projectors are preset for installation in CC67 cubes. For all other installations,
follow the steps outlined below.
1. Press Test once on the remote to display the internal geometry test pattern. The test image should
approximately fill the screen. If not, make a course adjustment using the 6–axis adjuster (see
Image Geometry Using the 6–axis
2. Loosen the corner focus–locking screw (A) and the center focus–locking screw (C).
3. Adjust the focus:
a. Adjust the focus at screen center (B).
b. Adjust corner focus and geometry by rotating the collar on the front of the lens. Use the illustration
below to gauge the preset position for your screen size.
c. Adjust the center focus (2) again for best overall screen focus.
4. Tighten the locking screws loosened in step 1.
4-2
Adjuster).
A
B
C
120"
100"
80"
60"
40"
50"
Entero Projector and Cube Installation Manual
4.4 Adjust
020-100839-01 Rev. 2 (04-2013)