Cc67 Specifications - Christie Entero RPMSP–LED01 Installation Manual

Projection engines
Hide thumbs Also See for Entero RPMSP–LED01:
Table of Contents

Advertisement

A.2 CC67 Specifications
Product
cube
make-up
1
projection engine
screen options
Imaging
imaging
technologies
native resolution
illumination
Pixel density
pitch
Screen
gap
types
Inputs
standard
scan rates
expansion
optional modules
compatibility
Illumination
technology
LED life rating
Color
temperature
range
gamut
adjustment
and control
Optical
lens types
brightness
uniformity
contrast ratio
Control/
ports/controls
networking
software
Upgradability
Optional
inputs
Accessories
other
Physical
dimensions
characteristics
weight (approx.)
shipping weight
(approx.)
stackability
service type
Environment
operating
temperature
non-operating
temperature
humidity
altitude
Power rating
voltage
(projection
current
engine)
consumption
dissipation
(maximum)
Reliability and
MTBF
serviceability
MTTR
Regulatory (projection engine)
Calibration
Limited warranty
Additional features and benefits
1
Cube, light engine and screen are sold separately.
field and ANSI methods. Such values are critical for proper contrast performance assessment – especially for video walls.
electronic equipment, such as projection systems, are regularly operated at temperatures below 77°F (25ºC).
A-4
SXGA+
CC67-3001
RPMSP-LED01
SC67-XP01
1-chip DLP, Dark Chip
SXGA+ (1400 x 1050)
Light Emitting Diodes (Red, Green, Blue)
26.1 pixels per linear inch
1mm nominal gap between adjacent images/screens
Wide angle cross prism
Digital DVI-I with analog VGA
Horizontal: 15-120kHz
Vertical: 23.97-150Hz
3 input module slots available
VGA, Digital (DVI), Analog (RGB), dual SDI/HDSI, twin HDMI
Compatible with Christie TVC Series video wall controllers or other input sources from VGA to QXGA as well as standard HD formats
LED (RGB)
2
>60,000 hrs
3200-9300K
Beyond 100% EBU
Screen to Screen: ArrayLOC automatic brightness and color management
Individual: Comprehensive Color Adjustment (CCA™)
0.69:1 low distortion, zero offset, with field curvature correction
Brightness uniformity control provides up to 100% uniformity capability for critical applications
3
>100,000:1 (full field using shutter mode)
2 RS-232 ports and 1 RS-422 port
IR remote control
GPIO port
Christie KoRE™ 10-bit librarian communication software for field upgrade of firmware
See input option modules above
Wired remote control
Pedestal
Depth: 30"
See included line drawings for additional dimensions
Cube enclosure: 141lbs (64kg)
Cube enclosure: 196lbs (89kg)
Maximum of up to 5 units high. Tie backs or lagging required for units <2 units high.
Rear access
Cube
40-95°F (5-35°C)
4
-4-122°F (-20-50°C)
20-80% non-condensing
Storage: 35-65% non-condensing
0-3000m (0-10,000ft)
100-240 VAC 50/60Hz
4.5A
Rating: 370W
1263 BTU/hr
>50,000 hrs MTBF for all major modules
<15 minutes with modular design
Directives: (EC) 2002/95/EC (RoHS)
UL 60950-1
IEC 60950-1
FCC, Part 15, Subpart B, Class A
Certifications marks (check with Christie for latest update):
KC (Korea)
PSE (Japan)
C-Tick (Australia & New Zealand)
All projection units are factory calibrated for best color performance
Two years parts and labor
Contact an authorized Christie representative for full details of our limited warranty
Integrated 6-axis adjustment system for precise geometry alignment
Multiple set-up memories to manage multiple input sources
Extensive scaling capability
without an external processor (a single input must be distributed to all cubes or it can be daisy-chained via use of the cube' s optional
Twin HDMI module)
3 x Redundant cooling fans
no motorized pumps, hazardous chemicals or concern of leakage)
2
LED lifetime is based on expected useful life to 50% brightness.
Pixel clock: 165 MHz
1400:1 (full field); up to 450:1 ANSI
Field upgradable software via RS-232 network or Ethernet
On-board ChristieNET™ connectivity (RJ45)
Screen (XPS type): 90lbs (41kg)
Light engine: 60lbs (27kg)
Screen (XPS type): 125lbs (45kg)
Light engine: 68lbs (31kg)
<5 minutes for lamp
2002/96/EC (WEEE)
Regulation (EC) No. 1907/2006 (REACH)
EN55022/CISPR22 Class A
cULus (Canada & US)
Picture-in-Picture capability
Window/screen processing – external inputs can be displayed across an array of screens up to 3x3
Innovative water-filled, sealed heat pipe cooling system (maintenance free,
3
The contrast ratio specified is the "natural" contrast ratio measured by both full
4
For best long-term performance and reliability, Christie recommends that all
Screens
63-88°F (17-31°C)
-4-95°F (20-35°C)
40-60% non-condensing
0-3000m (0-10,000ft)
CAN/CSA C22.2 No. 60950-1
EN55024/CISPR24
CE (EU)
CCC (China)
Full-function remote keypad with easy-to-use menu system
Control and status monitoring over IP
Entero Projector and Cube Installation Manual
GoST-R (Russia)
020-100839-01 Rev. 2 (04-2013)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents