Calculate Hardware Requirements; Em Network Example: 2 X 3 Wall - Christie Entero RPMSP–LED01 Installation Manual

Calculate Hardware Requirements

In an EM Network for ArrayLOC, each projector requires 2 ports on a network switch. For example, if you install
a 2 x 4 cube wall with 8 projectors, 16 ports are required (8 x 2 = 16).
Multiple switches must be connected to one another to form a single network. Typically, 2 extra ports are
required on each switch when you install multiple switches. For example, 22 ports are required if you install 3
switches for a 2 x 4 cube wall with 8 projectors (8 x 2 = 16) + (2 x 3 = 6).

EM Network Example: 2 x 3 Wall

This illustration shows a 2x3 wall with a single 12–port network switch.
EM
EM
3-16
EM
PHM LM
Adjuster
EM
PHM LM
Adjuster
ArrayLOC Network
EM
PHM LM
Adjuster
EM
PHM LM
Adjuster
Switch
Entero Projector and Cube Installation Manual
PHM LM
Adjuster
PHM LM
Adjuster
020-100839-01 Rev. 2 (04-2013)