Replacement Procedures; Remove The Top Cover, Ir Camera And Keypad - Christie Captiva DHD400S Service Manual

Parts and Module Replacement

Replacement Procedures

Remove the Top Cover, IR Camera and Keypad

1. Unscrew twelve screws, then use a flat head screw driver to press the four tabs (as the red
dotted square) to release the cover. Unplug FPC cable and disconnect the two IR camera harness
connectors to remove the top cover module.
2. Remove seven screws (as red circle) and unplug the FPC cable (as blue square) to remove IR
camera module and keypad module from the top cover module.Unplug two connectors to
separate IR camera. Separate keypad board and keypad button.
31 Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)