Christie Entero RPMSP–LED01 Installation Manual page 30

5. Install the remaining 2 M6 cap screws and M6 flat washers. Tighten all 4 screws.
6. Remove the 4 shipping bolts from the adjuster.
7. Turn the EM so the bracket extension
faces the back of the cube.
8. Install the EM to the left of the projector
using the 3 M6 cap screws and 3 flat
washers. The EM mounting location is
determined by the cube model. For
example in a CC70 cube, the EM
bracket is mounted to the rail.
3-4
only front screws shown
Remove
Tape and
Loosen
Securing
Bolt
Before
Operation
Remove
Tape and
Loosen
Securing
Bolt
Before
Operation
shipping bolts
CC50 / CC67
Entero Projector and Cube Installation Manual
All other models
020-100839-01 Rev. 2 (04-2013)