Enable Arrayloc; Source Connections; Dvi Digital Video - Christie Entero RPMSP–LED01 Installation Manual

3.7.4 Enable ArrayLOC

If using projector software version 1.3.x or later, the type of ArrayLOC network configuration being used must
be specified.
1. Navigate to the Main Menu > Configuration > ArrayLOC > ArrayLOC Configuration > ArrayLOC
Network option.
2. Select an ArrayLOC Network type in the list.
IMPORTANT: For the ArrayLOC functionality to work correctly, each projector in the array must be
configured to use the sam ArrayLOC network configuration
3.8

Source Connections

All source connections are made to the input panel of the EM. The input panel has 1 slot for an image processor
board, and 4 slots for input cards. The first slot includes a standard Dual Link DVI input module, which includes
a single dual link DVI input and an analog VGA input.
Input cards are hot swappable; they can be inserted and removed while the projector is running. Sources can also
be plugged in and unplugged while the projector is running.
There are 5 input cards available:
• Twin HDMI (High–Definition Multimedia Interface)
• Analog BNC
• Dual SD/HD–SDI (Serial Digital Interface)
• Dual Link DVI (standard with the projector)
• Video Decoder
These cards slide into any of the available input slots. One or more of the input slots may be used with any
combination of option cards, including multiples of the same card type. There may be up to 2 active inputs
displayed at any time, either from 1 card or from 2 cards. These 2 inputs can be routed to outputs or to the main or
PIP video image.
NOTE: Use the correct cable(s) to connect your source. Use only high–quality shielded cables for all
connections.

3.8.1 DVI Digital Video

• Use the DVI–I connector to connect either analog or digital video devices to the projector. Use a cable with
DVI–I connectors at both ends to connect devices that transmit digital and analog video signals such as high–
quality DVD players, satellite receivers and digital cable televisions.
• For true digital output from devices that transmit digital signals, connect to the DVI–I connector.
3-18
.
Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2 (04-2013)