Unpack And Stabilize Screens; Install The Pedestals - Christie Entero RPMSP–LED01 Installation Manual

2.5

Unpack and Stabilize Screens

1. Wear the lint–free cotton gloves provided in the user kit, remove the screen from the packaging and stand
it vertically against a wall or flat surface. Select a low–traffic area away from the installation to protect the
screens from accidental scratching or tipping.
2. Let the screen stabilize to ambient site conditions for a minimum 24 hours.
3. Wearing lint-free cotton gloves, remove the protective film from the back of the screen.
2.6

Install the Pedestals

When you install Christie display cubes, Christie recommends that you use a Christie pedestal which is
designed to support the maximum stacking limit of the display cubes. Alternatively, custom designed pedestals
can be used; however, it is the responsibility of the designer/installer to make sure the custom structure meets
performance and safety requirements.
CUBE
CC50
CC67
CC70
CC70HD
CC72
Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2(04-2013)
PEDESTAL
PE50
PE67
PE70
PE70HD
PE72
2-5