3 Projector Installation and Setup
The projector is designed for installation in a Christie cube display or a custom display structure. Before
installing projectors, make sure that the screens have been installed and that screen depth and height
adjustments are complete.
For information about installing an Entero projector in a custom installation, see
a Custom
Structure.
Use a stable cart to transport the projector. See the drawings given for your specific projector model for the
mounting hole location, and other technical information and restrictions which may be useful during
installation.
3.1
What's in the Box
• Projector Head Module (PHM), with attached Light Module (LM)
• Electronics Module (EM)
• Warranty Card
• Web Registration Form
• Line Cord (rated, North American)
NOTE:
A User Kit is supplied with each projection system. Additional User Kits can be purchased separately
(P/N: 125-108100-xx).
3.2
Unpack Projectors
The projector is shipped fully assembled.
1. Remove the projector from the box.
packaging for 1 projector to use for returning a
projector for servicing.
2. Tighten the lens lock knob.
Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2 (04-2013)
NOTE:
Keep
3.5 Installing the Projector in
Lens Lock Knob
3-1