Adjust Image Geometry Using The 6-Axis Adjuster - Christie Entero RPMSP–LED01 Installation Manual

4.4 Adjust Image Geometry Using the 6–axis Adjuster
Use the adjuster controls to adjust image geometry: position, keystone, zoom and tilt. Adjustment knobs are
color-coded. The 6–axis adjustment label on the product illustrates the function of each. Before making
adjustments, make sure the lock screws for each adjustment knob are loosened. Use the 5 mm hex key provided
to loosen the M6 lock screws and a 2 mm hex key (not provided) to loosen the collar lock screws. Tighten all lock
screws after image adjustments are complete.
The orientation of the projector in relation to the screen changes the effect of the knob adjustments. Vertical (lens
up) is the default installation. A label for the horizontal (lens forward) installation is included with the projector
for installations where the projector is configured for direct throw.
Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2 (04-2013)
unlocks
zoom control on
rear side of adjuster
Red Adjustment Knob: Use to adjust tilt.
Blue Adjustment Knob: Use to adjust the vertical position.
White Adjustment Knob: Use to adjust keystone.
Yellow Adjustment Knob: Use to adjust keystone.
Orange Adjustment Knob: Use to adjust the horizontal position.
Green Adjustment Knob: Use to adjust zoom.
4-3