5.17 Display is Noisy
1. Adjust the input source pixel tracking, phase, and filter.
2. Verify the video input is terminated (75 ohms). If the device is the last device in a linked series, verify the
video input is terminated at the last input source.
3. Verify the cables connecting the input device to the projector meet the minimum requirements.
4. Add signal amplification or conditioning if the distance between the input device and the projector exceeds
25 ft (7.6 m).
5-6
Entero Projector and Cube Installation Manual
020-100839-01 Rev. 2 (04-2013)