Specifications / Accessories / Options / Supplies; Specifications - Toshiba e-STUDIO350 Service Manual

1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES

1.1 Specifications

Values in [ ] are for e-STUDIO450 in case that the specification is different between e-STUDIO350 and
e-STUDIO450.
• Copy process
• Type
• Original table
• Accepted originals
• Copy speed (Copies/min.)
e-STUDIO350
Paper supply
Drawer
Paper size
A4, LT, B5
A4-R, B5-R,
A5-R, LT-R, ST-R
B4, LG
A3, LD
e-STUDIO450
Paper supply
Drawer
Paper size
A4, LT, B5
A4-R, B5-R,
A5-R, LT-R, ST-R
B4, LG
A3, LD
"–" means "Not acceptable".
*
The copy speed in the above table are available when originals are manually placed for single side,
*
multiple copying.
When the RADF is used, the copy speed of 35[45] sheets per minute is only available under the
*
following conditions:
• Original/Mode:
• Number of sheets:
• Paper feeding:
• Reproduction ratio:
November 2003 © TOSHIBA TEC
Indirect electrophotographic process (dry)
Desktop type (console type:when paper feed pedestal (PFP) and large capac-
ity feeder (LCF) are installed)
Fixed type (the left rear corner used as guide to place originals)
Sheet, book and 3-dimensional object. The reversing automatic document
feeder (RADF) only accepts paper which are not pasted or stapled. (Single-
sided originals: 50 to 127 g/m
to105 g/m 2 /13 to 28 lb. Bond) Carbon paper are not acceptable either.
Maximum size : A3/LD
Bypass feed
Size specified
35 35
25 25
21 21
18 18
Bypass feed
Size specified
45 40
28 28
24 24
21 21
Single side original/A4/LT size. APS/automatic density are not selected.
35[45] or more.
LCF
100%
1 - 1
2
/13 to 34lb. Bond, Double-sided originals: 50
PFP
Size not specified
18 35
18 25
18 21
18 18
PFP
Size not specified
21 45
21 28
21 24
21 21
e-STUDIO350/450 SPECIFICATIONS
1
LCF
35
–
–
–
LCF
45
–
–
–