Installation; Description; Operation - Chrysler Vehicle User Manual

TJ
REAR MOUNT (Continued)
Fig. 75 Rear Mount (Manual Transmission)
1 - CUSHION
2 - BRACKET
3 - SKID PLATE
AUTOMATIC TRANSMISSIONS
(1) Remove nuts holding support cushion to trans-
mission support bracket (Fig. 76). Remove the sup-
port cushion.
(2) Remove the bolts holding the transmission sup-
port bracket to transmission.
(3) Remove the transmission support bracket.

INSTALLATION

MANUAL TRANSMISSION
(1) Position the transmission mount bracket to the
transmission and install the bolts (Fig. 75).
(2) Tighten the bolts to 54 N·m (40 ft. lbs.) torque.
(3) Position the support cushion to the transmis-
sion mount bracket and install nuts (Fig. 75).
AUTOMATIC TRANSMISSION
(1) Position the transmission mount bracket to the
transmission and install the bolts. Tighten the bolts
to 54 N·m (40 ft. lbs.) torque.
(2) Position the support cushion to the transmis-
sion mount bracket and install nuts. Tighten the
nuts to 41 N·m (30 ft. lbs.) torque (Fig. 76).
(3) If the support cushion bracket was removed
from the skid plate, position the bracket on the skid
plate and install the nuts and bolts. Tighten the nuts
to 28 N·m (21 ft. lbs.) torque.
Fig. 76 Rear Mount (AutomaticTransmission)
1 - BRACKET
2 - CUSHION
3 - BRACKET
ALL TRANSMISSIONS
(1) Position the skid plate to the studs of the sup-
port cushion and install the nuts (Fig. 75) (Fig. 76).
Tighten the nuts to 28 N·m (21 ft. lbs.) torque.
(2) Install the skid plate bolts to the sill and
tighten to 75 N·m (55 ft. lbs.) torque.
(3) Remove the transmission support.
(4) Lower the vehicle.
(5) Connect negative cable to battery.
LUBRICATION

DESCRIPTION

A gear—type positive
mounted at the underside of the block opposite the
No. 4 main bearing.

OPERATION

The pump draws oil through the screen and inlet
tube from the sump at the rear of the oil pan. The oil
is driven between the drive and idler gears and
pump body, then forced through the outlet to the
block. An oil gallery in the block channels the oil to
the inlet side of the full flow oil filter. After passing
through the filter element, the oil passes from the
center outlet of the filter through an oil gallery that
ENGINE 4.0L 9 - 117
displacement pump is