Chrysler Vehicle User Manual page 1161

21 - 24 MANUAL - NV1500
MANUAL - NV1500 (Continued)
Fig. 76 LEVER OPENING IN HOUSING
1 - SHIFT SHAFT
Fig. 77 SHIFT SOCKET AND SHAFT
1 - SHIFT SOCKET
2 - SHIFT SHAFT
(9) Select correct new roll pin for shift shaft lever
(Fig. 78). Shaft lever roll pin is approximately 22 mm
(7/8 in.) long. Shift socket roll pin is approximately
33 mm (1-1/4 in.) long.
Fig. 78 SHAFT LEVER AND SOCKET ROLL PINS
1 - SHAFT LEVER ROLL PIN
2 - SHIFT SOCKET ROLL PIN
(10) Align roll pin holes in shift shaft, lever and
bushing, then start roll pin into shaft lever by hand
(Fig. 79).
Fig. 79 STARTING ROLL PIN IN SHIFT SHAFT
1 - SHAFT LEVER ROLL PIN
2 - LEVER AND BUSHING
(11) Seat shaft lever roll pin with pin punch (Fig.
80).
CAUTION: Shaft lever roll pin must be flush with
the surface of the lever. The lever bushing will bind
on the roll pin if the pin is not seated flush.
(12) Verify lock pin slot in lever bushing is posi-
tioned as shown (Fig. 80).
Fig. 80 SEATING SHIFT SHAFT LEVER ROLL PIN
1 - BUSHING LOCK PIN SLOT
2 - SEAT ROLL PIN FLUSH WITH LEVER
(13) Align roll pin holes in shift socket and shift
shaft. Then start roll pin into shift shaft by hand
(Fig. 81).
LEVER
TJ