Assembly - Chrysler Vehicle User Manual

TJ
INPUT CLUTCH ASSEMBLY (Continued)
Fig. 183 Return Spring and Snap Ring
1 - OD/REVERSE PISTON
2 - RETURN SPRING
3 - SNAP RING
4 - O-RING
(25) Remove input shaft to input clutch hub snap
ring (Fig. 184).
Fig. 184 Remove Input Shaft Snap Ring
1 - INPUT SHAFT
2 - SHARP-POINTED TOOL
3 - SNAP RING
4 - O-RINGS
5 - SEALS
(26) Using a suitably sized socket and an arbor
press, remove input shaft from input shaft hub (Fig.
185).
AUTOMATIC TRANSMISSION - 42RLE
Fig. 185 Remove Input Shaft
1 - ARBOR PRESS RAM
2 - SOCKET
3 - SEAL
4 - O-RINGS
5 - INPUT SHAFT
6 - SEAL
7 - INPUT CLUTCH HUB

ASSEMBLY

Use petrolatum on all seals to ease assembly of
components.
(1) Using an arbor press, install input shaft to
input shaft hub (Fig. 186).
Fig. 186 Install Input Shaft
1 - INPUT SHAFT
2 - ARBOR PRESS RAM
3 - INPUT CLUTCH HUB
21 - 151