Chrysler Vehicle User Manual page 1385

21 - 248 TRANSFER CASE - NV241
TRANSFER CASE - NV241 (Continued)
Fig. 67 Shift Fork Rail Installation
1 - FRONT CASE HALF
2 - SHIFT RAIL
FRONT OUTPUT SHAFT AND DRIVE CHAIN
(1) Install front output shaft into the font output
shaft bearing (Fig. 68).
Fig. 68 Front Output Shaft Installation
1 - FRONT CASE HALF
2 - FRONT OUTPUT SHAFT
(2) Install the front output shaft snap-ring onto
the front output shaft.
(3) Install new front output seal (Fig. 69) in front
case with Installer 9041 and Handle C-4171.
Fig. 69 Front Output Shaft Seal Installation
1 - HANDLE C-4171
2 - INSTALLER 9041
(4) Insert front sprocket in drive chain (Fig. 70).
(5) Install drive chain around mainshaft drive
sprocket (Fig. 70). Then position front sprocket over
front output shaft.
(6) Install the mainshaft into the range hub and
mode sleeve and seat the front drive sprocket onto
the front output shaft (Fig. 70).
(7) Install the front drive sprocket retaining ring
(Fig. 71).
Fig. 70 Install Mainshaft, Drive Chain, and Front
1 - MAINSHAFT
2 - DRIVE CHAIN
3 - DRIVE SPROCKET
Sprocket
TJ