Chrysler Vehicle User Manual page 1151

21 - 14 MANUAL - NV1500
MANUAL - NV1500 (Continued)
(6) Install fifth gear synchro ring in synchro hub
and sleeve (Fig. 41).
Fig. 41 FIFTH GEAR SYNCHRO RING
1 - FIFTH-SPEED SYNCHRO RING
2 - FIFTH-REVERSE SYNCHRO ASSEMBLY
(7) Install fifth gear bearing, spreading bearing
only enough to clear shoulder on output shaft (Fig.
42). Verify bearing is seated.
Fig. 42 FIFTH GEAR BEARING
1 - SHAFT SHOULDER
2 - FIFTH GEAR BEARING
(8) Install fifth gear on shaft and onto bearing
(Fig. 43).
(9) Install output shaft bearing.
Fig. 43 FIFTH GEAR
1 - FIFTH GEAR
2 - BEARING
(10) Install output shaft bearing snap ring, spread
snap ring only enough to install it (Fig. 44). Verify
snap ring is seated in shaft groove.
Fig. 44 OUTPUT SHAFT BEARING
1 - BEARING SNAP RING
2 - HEAVY DUTY SNAP RING PLIERS
(11) Invert output shaft and set the shaft in Cup
6310-1 so that fifth gear is seated on the tool (Fig.
45).
(12) Install first gear bearing on output shaft (Fig.
45). Verify bearing is seated on shaft shoulder and is
properly joined.
TJ