Chrysler Vehicle User Manual page 1375

21 - 238 TRANSFER CASE - NV241
TRANSFER CASE - NV241 (Continued)
Fig. 27 Shift Sector Removal
1 - FRONT CASE HALF
2 - SHIFT SECTOR
MAINSHAFT
(1) Remove the snap-ring that secures the chain
drive sprocket onto mainshaft (Fig. 28). Use standard
(instead of parallel jaw) snap-ring pliers to remove
this snap-ring.
(2) Remove drive sprocket (Fig. 29).
Fig. 28 Mainshaft Drive Sprocket Snap-Ring
1 - MAINSHAFT
2 - DRIVE SPROCKET
3 - SNAP-RING
(3) Remove the sliding clutch gear (Fig. 30) from
the mainshaft.
(4) Rotate the mainshaft 180° and remove the
mode hub snap-ring (Fig. 31).
Removal
Fig. 29 Mainshaft Drive Sprocket Removal
1 - MAINSHAFT
2 - DRIVE SPROCKET
Fig. 30 Sliding Clutch Gear Removal
1 - MAINSHAFT
2 - SLIDING CLUTCH GEAR
Fig. 31 Mode Hub Snap-Ring Removal
1 - MAINSHAFT
2 - MODE HUB
3 - SNAP-RING
TJ