Chrysler Vehicle User Manual page 1188

TJ
MANUAL - NV3550 (Continued)
Fig. 69 THIRD GEAR BEARING
1 - THIRD GEAR BEARING
Fig. 70 THIRD GEAR
1 - THIRD GEAR
2 - BEARING
Fig. 71 THIRD SPEED SYNCHRO RING
1 - THIRD SPEED SYNCHRO RING
2 - THIRD GEAR
MANUAL - NV3550
Fig. 72 3-4 SYNCHRO HUB ON OUTPUT SHAFT
1 - GROOVED SIDE OF SLEEVE (TO FRONT)
2 - 3-4 SYNCHRO ASSEMBLY
(31) With the lug on the ring aligned with the slot
on the synchro, press 3-4 synchro assembly onto out-
put shaft with shop press and suitable size pipe tool
(Fig. 73).
NOTE: Place the pipe on hub as close to output
shaft as possible without contacting the shaft
splines.
Fig. 73 3-4 SYNCHRO ON OUTPUT SHAFT
1 - PRESS RAM
2 - PIPE TOOL
3 - 3-4 SYNCHRO
4 - THIRD SPEED SYNCHRO RING
(32) Install new 3-4 synchro hub snap ring (Fig.
74) and verify snap ring is seated.
21 - 51