Chrysler Vehicle User Manual page 1473

23 - 60 INTERIOR
SPORT BAR - SPEAKER POD
REMOVAL
(1) On vehicles equipped with a soft top, unzip the
side panel next to the pod.
(2) On vehicles equipped with a hard top, unclip
the windshield clamps.
(3) Remove the bolts on side of the top next to the
pod and loosen the opposite side bolts. (Refer to 23 -
BODY/REMOVEABLE
REMOVAL)
(4) Lift up the side of the top to gain access to the
pod bolts and support with a block of wood or similar.
(5) Remove the two bolts securing the pod to the
sport bar.
TOP/HARD TOP
(6) Separate the pod guide pin from the sport bar
and disconnect the electrical connector.
INSTALLATION
(1) Connect the pod electrical connector and install
the pod onto the guide pin.
(2) Install the bolts and tighten to 68 N·m (50 ft.
lbs.).
(3) On vehicles equipped with a hard top, install
the hard top. (Refer to 23 - BODY/REMOVABLE
-
TOP/HARD TOP - INSTALLATION)
(4) On vehicles equipped with a soft top, zip up the
side panel.
TJ