Chrysler Vehicle User Manual page 1484

TJ
FRONT SEAT BACK RECLINER CABLE (Continued)
Fig. 6 RECLINER HANDLE/CABLE
1 - RECLINER HANDLE
2 - RECLINER CABLE END
3 - RECLINER CABLE
4 - RECLINER HANDLE BOLT
Fig. 7 RECLINER CABLE END
1 - RECLINER CABLE
2 - RECLINER CABLE END
(4) Install seat back cover. (Refer to 23 - BODY/
SEATS/FRONT SEAT BACK COVER - INSTALLA-
TION)
FRONT SEAT FOLDING
RELEASE CABLE
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Disconnect the release cable folding end. (Fig.
8)
(3) Remove the inboard recliner. (Refer to 23 -
BODY/SEATS/SEAT BACK RECLINER - REMOVAL)
(4) Disconnect the release cable assembly at the
inboard recliner, from the support bracket. (Fig. 9)
(5) Disconnect the cable assembly at the slider and
remove. (Fig. 10)
Fig. 8 RELEASE CABLE/FOLDING END
1 - CABLE END CLIP
2 - CABLE HOUSING
Fig. 9 RELEASE CABLE/RECLINER END
1 - CABLE ASSEMBLY
2 - CABLE HOUSING
3 - SEAT CUSHION FRAME
4 - CABLE SUPPORT BRACKET
INSTALLATION
(1) Connect the cable assembly at the slider.
(2) Connect the inboard release cable assembly to
the support bracket at the recliner.
(3) Install the inboard recliner. (Refer to 23 -
BODY/SEATS/SEAT BACK RECLINER - INSTAL-
LATION)
(4) Connect the folding end of the release cable
assembly.
SEATS 23 - 71