Chrysler Vehicle User Manual page 1193

21 - 56 MANUAL - NV3550
MANUAL - NV3550 (Continued)
Fig. 85 REVERSE IDLER ASSEMBLY POSITION
1 - OUTPUT SHAFT AND GEARTRAIN
2 - COUNTERSHAFT
3 - REVERSE IDLER ASSEMBLY
4 - TOOL PEDESTAL
(11) Assemble 1-2 and fifth reverse-shift forks (Fig.
86). Arm of fifth-reverse fork goes through slot in 1-2
fork.
Fig. 86 1-2 AND FIFTH-REVERSE
1 - FIFTH-REVERSE FORK ARM
2 - 1-2 FORK
3 - FIFTH-REVERSE FORK
(12) Install assembled shift forks in synchro
sleeves (Fig. 87). Verify forks are properly seated in
sleeves.
Fig. 87 SHIFT FORKS IN SYNCHRO
1 - SYNCHRO SLEEVES
2 - FORK ARMS
3 - SHIFT FORKS
ADAPTER HOUSING
(1) Install rear bearing in adapter housing. Use
wood hammer handle or wood dowel to tap bearing
into place.
(2) Position rear bearing retainer in adapter hous-
ing (Fig. 88).
Fig. 88 ADAPTER HOUSING
1 - BEARING RETAINER
2 - RETAINER BOLT
3 - IDLER SHAFT NOTCH
4 - COUNTERSHAFT BEARING RACE
5 - REAR BEARING
(3) Apply Mopar Gasket Maker or equivalent, to
threads, bolt shanks and under hex heads of bearing
retainer bolts.
TJ