Chrysler Vehicle User Manual page 1448

TJ
HOOD (Continued)
1 - WINDSHIELD REST BUMPER
2 - HOOD HINGE
3 - HOOD
4 - HOOD CATCH BRACKET
HOOD SAFETY LATCH
REMOVAL
(1) Raise and support the hood.
(2) Remove the bolt attaching the safety latch to
the hood (Fig. 2).
(3) Remove the latch from the hood.
INSTALLATION
(1) Position the latch on the hood.
(2) Install the bolt attaching the safety latch to the
hood and tighten to 9 N·m (80 in. lbs.).
(3) Remove the support rod and close the hood.
Fig. 1 HOOD COMPONENTS
5 - HOOD CATCH
6 - PROP ROD CLIP
7 - PROP ROD
8 - WINDSHIELD HOOD DOWN LOOP
1 - SAFETY LATCH
2 - HOOD
Fig. 2 HOOD SAFETY LATCH
HOOD 23 - 35