Chrysler Vehicle User Manual page 1175

21 - 38 MANUAL - NV3550
MANUAL - NV3550 (Continued)
(8) Remove the reverse idler shaft support bolt
(front bolt) (Fig. 24).
(9) Loosen rear reverse idler shaft bolt (rear bolt)
(Fig. 24).
Fig. 24 REVERSE IDLER SHAFT/SUPPORT BOLT
1 - SUPPORT BOLT
2 - SHAFT BOLT
(10) Remove reverse idler shaft support (Fig. 25)
segment by sliding it straight out of housing.
Fig. 25 IDLER SHAFT SUPPORT
1 - IDLER SHAFT
2 - IDLER SHAFT SUPPORT
(11) Support geartrain and rear housing on Fix-
ture 6747 as follows:
(a) Adjust height of reverse idler pedestal rod
until the reverse idle shaft bottoms in Cup 8115.
(b) Position Adapters 6747-1A and 6747-2A on
Fixture 6747.
(c) Slide fixture tool onto input shaft, counter-
shaft and idler gear (Fig. 26).
(d) Stand geartrain and rear housing upright on
fixture (Fig. 27). Have helper hold fixture tool in
place while housing and geartrain is being rotated
into upright position.
Fig. 26 FIXTURE ASSEMBLY
1 - FIXTURE
2 - ADAPTER 6747-1A
3 - CUP ADAPTER
4 - REVERSE IDLER PEDESTAL
5 - ADAPTER 6747-2A
Fig. 27 GEARTRAIN/HOUSING FIXTURE
1 - INPUT SHAFT
2 - COUNTERSHAFT
3 - FIXTURE
(12) Remove rear bolt holding reverse idler shaft
in housing.
TJ