Chrysler Vehicle User Manual page 1171

21 - 34 MANUAL - NV3550
MANUAL - NV3550 (Continued)
Fig. 7 SHAFT LOCK BOLT
1 - SHIFT SHAFT LOCK BOLT
2 - SHAFT SOCKET
(7) Remove shift shaft detent plug with Remover
8117A. Attach the fingers of the remover to the
detent plug (Fig. 8). Then push the cup down till it
contacts the trans. Tighten the nut (Fig. 9) till it
pulls the plug from the trans case.
Fig. 8 DETENT PULLER
1 - REMOVER
2 - DETENT PLUG
(8) Remove shift shaft detent plunger and spring.
Remove spring and plunger with a pencil magnet.
(9) Remove bolts attaching input shaft bearing
retainer to front housing and remove retainer.
NOTE: Use pry tool to carefully lift retainer and
break sealer bead (Fig. 10).
(10) Remove bearing retainer from input shaft
(Fig. 11).
Fig. 9 PULL DETENT PLUG
1 - NUT
2 - REMOVER
Fig. 10 BEARING RETAINER
1 - PRY TOOL
2 - BEARING RETAINER
Fig. 11 INPUT SHAFT BEARING RETAINER
1 - SHAFT BEARING
2 - BEARING RETAINER
3 - INPUT SHAFT
TJ