Symbol AP-51xx Product Reference Manual page 140

4-48 AP-51xx Access Point Product Reference Guide
To conduct a firmware update on the access point:
1. Export the access point current configuration settings before updating the firmware to have
the most recent settings available after the firmware is updated.
Refer to Importing/Exporting Configurations on page 4-41
access point's current configuration to have it available after the firmware is updated.
2. Select System Configuration
3. Configure the
configuration file updates.
DHCP options are used for out-of-the-box rapid deployment for Symbol wireless products.
The following are the two options available on the access point:
• Enable Automatic Firmware Update
• Enable Automatic Configuration Update
Both DHCP options are enabled by default.
- > Firmware Update
DHCP Options checkboxes to enable/disable automatic firmware and/or
for instructions on exporting the
from the access point menu tree.