Symbol AP-51xx Product Reference Manual page 96

Table of Contents

Advertisement

4-4
AP-51xx Access Point Product Reference Guide
Country
AP-51xx Version
System Uptime
Serial Number
3. Refer to the
CAUTION Restoring the access point's configuration back to default settings
!
access point
The
after the first login. A warning message also displays stating that
an incorrect country setting will lead to an illegal use of the access
point. Use the pull-down menu to select the country of operation.
Selecting the correct country is extremely important. Each country
has its own regulatory restrictions concerning electromagnetic
emissions (channel range) and the maximum RF signal strength
transmitted. To ensure compliance with national and local laws, be
sure to set the
Country
access point
If using the
access point
the
The displayed number is the current version of the device firmware.
Use this information to determine if the access point is running the
most recent firmware available from Symbol. Use the
Update
screen to keep the AP's firmware up to date. For more
information, see
Displays the current uptime of the
System Name field. System Uptime is the cumulative time since
access point
the
Displays the access point Media Access Control (MAC) address.
The access point MAC address is hard coded at the factory and
cannot be modified. The LAN and WAN port MAC addresses can be
located within the LAN and WAN Stats screens. For information on
locating the access point MAC addresses, see
Statistics on page 7-2
Factory Defaults
field to restore either a full or partial default configuration.
changes the administrative password back to "symbol." If restoring
the configuration back to default settings, be sure you change the
administrative password accordingly.
prompts the user for the correct country code
field correctly.
configuration file, CLI or MIB to configure
's country code, see
Country Codes on page
Updating Device Firmware on page
access point
was last rebooted or lost power.
and
Viewing LAN Statistics on page
A-9.
Firmware
4-46.
defined in the
Viewing WAN
7-6.

Advertisement

Table of Contents
loading

Table of Contents