Symbol AP-51xx Product Reference Manual page 406

8-80 AP-51xx Access Point Product Reference Guide
enc
retry
accounting mode
server
port
secret
timeout
retry
syslog
ip
adv mu-quiet
mu-timeout
mu-tx
mu-retry
svr-timeout
svr-retry
<idx> <type>
<number> Sets the maximum number of reauthentication
retries <retry> (1-99).
<mode> Enable or disable Radius accounting.
<ip> Set external Radius server IP address.
<port> Set external Radius server port number.
<secret> Set external Radius server shared secret
password.
<period> Defines MU timout period in seconds (1-255).
<number> Sets the maximum number of MU retries to
<retry> (1-10).
<mode> Enable or disable syslog messages.
<ip> Defines syslog server IP address.
<time> Set the EAP MU/supplicant quiet period to
<time> seconds (1-65535).
<timeout> Sets the EAP MU/supplicant timeout in seconds
(1-255).
<time> Sets the EAP MU/supplicant TX period <time> in
seconds (1-65535).
<count> Sets the EAP maximum number of MU retries to
<count> (1-10).
<time> Sets the server timeout <time> in seconds (1-
255).
<count> Sets the maximum number of server retries to
<count> (1-255).
Note: The WEP authentication mechanism saves
up to four different keys (one for each WLAN). It
is not requirement to set all keys, but you must
associate a WLAN with the same keys.
Sets the encryption type to <type> (one of none,
wep40, wep104, keyguard, tkip, or ccmp) for
WLAN <idx>.