Configuring Snmp Settings - Symbol AP-51xx Product Reference Manual

4-20 AP-51xx Access Point Product Reference Guide

4.4 Configuring SNMP Settings

Simple Network Management Protocol (SNMP) facilitates the exchange of management information
between network devices. SNMP uses Management Information Bases (MIBs) to manage the device
configuration and monitor Internet devices in potentially remote locations. MIB information accessed
via SNMP is defined by a set of managed objects called object identifiers (OIDs). An object identifier
(OID) is used to uniquely identify each object variable of a MIB. The AP-5131-MIB can be used with
an AP-5181 model access point (there is no separate MIB for an AP-5181 model access point). The
access point Web download package contains the following 2 MIB files:
• Symbol-CC-WS2000-MIB-2.0 (common Symbol MIB file)
• Symbol-AP-5131-MIB (AP-5131 specific MIB file)
NOTE The Symbol-AP-5131-MIB contains the majority of the information
If using the Symbol-CC-WS2000-MIB-2.0 and/or Symbol-AP-5131-MIB to configure the AP-5131, use
the table below to locate the MIB where the feature can be configured.
Feature
LAN Configuration
VLAN Configuration
802.1x Port
Authentication
Ethernet Type Filter
Configuration
Wireless
Configuration
Security Configuration Symbol-AP-5131-MIB
MU ACL Configuration Symbol-AP-5131-MIB
contained within the Symbol-CC-WS2000-MIB-2.0 file. This feature rich
information has been validated with the Symbol WS2000 and proven
reliable. The remaining portion of the Symbol-AP-5131-MIB contains
supplemental information unique to the access point feature set.
MIB
Symbol-AP-5131-MIB
Symbol-AP-5131-MIB
Symbol-AP-5131-MIB
Symbol-AP-5131-MIB
Symbol-AP-5131-MIB
Feature
Subnet Configuration Symbol-CC-WS2000-MIB-2.0
DHCP Server Symbol-CC-WS2000-MIB-2.0
Configuration
Advanced DHCP Symbol-CC-WS2000-MIB-2.0
Server configuration
WAN IP Configuration Symbol-CC-WS2000-MIB-2.0
PPP Over Ethernet Symbol-CC-WS2000-MIB-2.0
NAT Address Mapping Symbol-CC-WS2000-MIB-2.0
VPN Tunnel Symbol-CC-WS2000-MIB-2.0
Configuration
MIB