Symbol AP-51xx Product Reference Manual page 443

AP51xx>admin(network.wireless.rogue-ap)> set
Description:
Defines the access point ACL rogue AP method.
Syntax:
set mu-scan <mode>
interval <minutes>
on-channel <mode>
detector-scan <mode>
symbol-ap <mode>
applst-ageout <minutes>
roglst-ageout <minutes>
Example:
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)>set mu-scan enable
admin(network.wireless.rogue-ap)>set interval 10
admin(network.wireless.rogue-ap)>set on-channel disable
admin(network.wireless.rogue-ap)>set detector-scan disable
admin(network.wireless.rogue-ap)>set symbol-ap enable
admin(network.wireless.rogue-ap)>set applst-ageout 10
admin(network.wireless.rogue-ap)>set roglst-ageout 10
admin(network.wireless.rogue-ap)>show
MU Scan
MU Scan Interval
On Channel
Detector Radio Scan
Detector Radio Band
Auto Authorize Symbol APs
Approved AP age out
Rogue AP age out
For information on configuring the Rogue AP options available to the access point using the applet (GUI), see
Configuring Rogue AP Detection on page
Enables or disables to permit MUs to scan for rogue APs.
Define an interval for associated MUs to beacon in attempting to locate rogue APs.
Value not available unless mu-scan is enabled.
Enables or disables on-channel detection.
Enables or disables AP detector scan (dual-radio model only).
Enables or disables the Authorize Any AP with a Symbol MAC address option.
Sets the approved AP age out time.
Sets the rogue AP age out time.
: enable
: 10 minutes
: disable
: disable
: none
: enable
: 10 minutes
: 10 minutes
6-55.
Command Line Interface Reference 8-117