Table of Contents
Advertisement
BSSID #4
00:A0:F8:72:20:DF
For detailed information on strategically mapping BSSIDs to WLANs, see
802.11b/g Radio on page
51xx MAC Address Assignment on page
1.2.7 Quality of Service (QoS) Support
The access point QoS implementation provides applications running on different wireless devices a
variety of priority levels to transmit data to and from the access point. Equal data transmission priority
is fine for data traffic from applications such as Web browsers, file transfers or email, but is
inadequate for multimedia applications.
Voice over Internet Protocol (VoIP), video streaming and interactive gaming are highly sensitive to
latency increases and throughput reductions. These forms of higher priority data traffic can
significantly benefit from the access point QoS implementation.The WiFi Multimedia QOS Extensions
(WMM) implementation used by the access point shortens the time between transmitting higher
priority data traffic and is thus desirable for multimedia applications. In addition, U-APSD (WMM
Power Save) is also supported.
WMM defines four access categories—voice, video, best effort and background—to prioritize traffic
for providing enhanced multimedia support.
For detailed information on configuring QoS support for the access point, see
Quality of Service (QoS) Policy on page
1.2.8 Industry Leading Data Security
The access point supports numerous encryption and authentication techniques to protect the data
transmitting on the WLAN.
The following authentication techniques are supported on the access point:
•
Kerberos Authentication
•
EAP Authentication
The following encryption techniques are supported on the access point:
•
WEP Encryption
•
KeyGuard Encryption
•
Wi-Fi Protected Access (WPA) Using TKIP Encryption
5-55. For information on access point MAC address assignments, see
1-24.
5-39.
Radio MAC address +3
Configuring the 802.11a or
Setting the WLAN
1-9
Introduction
AP-
Advertisement
Table of Contents
